| |
|
|
Warp-Knitted Reinforcement Geogrids
Description:
reinforcement geogrids – Fiberglass and Polyester. FIBERGLASS grid is widely used for roadway or airport runway asphalt pavement reinforcement to reduce the effects of reflective and thermal crackings to prolong the pavement service life, while POLYESTER Geogrid is generally used for soil reinforcement and stabilization to improve the load bearing capacity in the construction of steep slopes, retaining walls, bridge abutments, river banks, railway foundations, mine pits and other general earthworks.
|
 |
|
Fiberglass grid’ s specifications are as follows:
|
Specification
|
Tensile Strength KN/m≥ 17.5
|
Weight (approx.)
g/m2
|
Maximum Elongation
≤%
|
Maximum Width
Meter
|
Maximum Length
Meter |
|
Warp
(MD)
|
Weft
(CMD)
|
|
BJG30X30-Z
|
30 |
30
|
285
|
≤4%
|
4
|
＜100KN： 100M ;
≥100KN, 50M;
or as per client’s requirements. |
|
BJG40X40-Z
|
40
|
40
|
300
|
4
|
| BJG50X50-Z |
50
|
50
|
364
|
4
|
|
Fiberglass grid is made from the high strength fiberglass yarns knitted into mesh coated with modified polymer mixture.. It has high tensile strength, high modulus, low elongation, good creep resistance, anti-ageing, decay resistance, and crack resistance. The specifications are as follows:
Specification |
Tensile Strength KN/m≥ |
Weight (approx.)
g/m2 |
Maximum Elongation
≤%
| Maximum Width
Meter |
Maximum Length
Meter |
Warp
(MD) |
Weft
(CMD) |
BJG30X30-Z
|
30 |
30 |
285 |
≤4%
|
4 |
＜100KN,
100 meters ;
≥100KN, 50 meters;
Other lengths may run per customers' requirements.
|
BJG40X40-Z
|
40 |
40 |
300 |
4 |
| BJG50X50-Z |
50 |
50 |
364 |
4 |
| BJG60X60-Z |
60 |
60 |
410 |
4 |
| BJG80X80-Z |
80 |
80 |
612 |
4 |
| BJG100X100-Z |
100 |
100 |
693 |
4 |
| BJG200X100-Z |
200 |
100 |
945 |
4 |
Note:
Aperture: 1 inch x 1 inch (24.5mm x 24.5mm) or 1/2 inch x 1/2 inch (12.7mm x 12.7mm)
“Z” denotes the grids with Self-Adhesive backing
Polyester geogrid is made from the high tenacity polyester yarns knitted into mesh coated with modified polymer mixture. It has high tensile strength, high modulus, good creep resistance, ageing, decay and crack resistance properties. The specifications are as follows:
Specification |
Tensile Strength KN/m≥ |
Weight (approx.)
g/m2 |
Maximum Elongation
≤%
|
Maximum Width
Meter |
Maximum
Length
Meter
|
Warp
(MD) |
Weft
(CMD) |
DJG20×20 |
20 |
20 |
211 |
≤12%
|
5.5 |
＜100KN, 100 meters ; ≥100KN, 50 meters; Other lengths may run per customers' requirements.
|
DJG30X30 |
30 |
30 |
253 |
5.5 |
| DJG50X50 |
50 |
50 |
350 |
5.5 |
| DJG80X30 |
80 |
30 |
350 |
5.5 |
| DJG80X80 |
80 |
80 |
454 |
5.5 |
| DJG100X50 |
100 |
100 |
465 |
5.5 |
| DJG100X100 |
100 |
50 |
600 |
5.5 |
| DJG200X50 |
200 |
100 |
1020 |
3 |
| DJG50 (Unidirectional) |
50 |
10 |
189 |
5.5 |
| DJG80 (Unidirectional) |
80 |
10 |
303 |
5.5 |
| DJG100 (Unidirectional) |
100 |
10 |
385 |
5.5 |
| DJG120 (Unidirectional) |
120 |
10 |
400 |
5.5 |
| DJG200 (Unidirectional) |
200 |
30 |
988 |
3 |
|
| |
Hunan
Haofa Economic Trade Development Co., Ltd.
Add.: 2823-2825,Center Building Of City,No.235,Wuyi
Road,Changsha,Hunan,P.R.China
P.C.:410011.
Tel: 0086-731-4467632 4467631.
Fax: 0086-731-4467630.
E-mail: L-h73@163.net or fiberglass@asiaglassfiber.com
General Manager: Mr. Li Hao. |
|
 |
 |
